Products
- HOME
- Industrial processing equipment
- Peripherals
- Frame Set t ing Machine Series
Peripherals
Industrial processing equipmentトップFrame Set t ing Machine Series
FS□-□ series
- Variable work size frame setter: □120mm～230mm
- A highly accurate processing is achieved by punching and the print.
- Tape application system keeps the sheet from slipping off.
- The variation from a simple manual type to the automation type is prepared.
- Space-saving design Easy installation
- High operating efficiency
Characteristics
- FS-S5・9
- Square type
- Variable work size frame setter: □120mm～230mm
- Compact and light for easy installation.
- FS-4・12
- Rectangle/Square type
- work size frame setter: one edge 100mm～300mm
- Compact and light for easy installation.
- FSA-4×6 RO
- Square type
- Automatic magazine supplying and carrying out the work
- Variable work size frame setter : ※□150mm(※：standard)
- The rolled-up sheet is adopted. Sheet supplying (option)
- The multi process work magazine is used in common.(Decided by you.)
- LCD touch panel is easy to operate, and enables to check the displayed machine operation.
●Work size is not limited to 6inches and responds to the consultation.
Standard Specifications
| Model name | FS-S5・9 | FS-4・12 | FSA-6×6RO | |
|---|---|---|---|---|
| Work | Material | FPC,ceramic green sheets | ||
| Size | □120～230mm t：0.1～1.0mm |
Rectangle/Square type: one edge 100mm ～ 300mm t：0.1～1.0mm |
□150mm(Standard:Itdepends on meeting) t：0.1～1.0mm Roll diameter：Max.φ350mm |
|
| Tape sticking size is set manually. | ||||
| Holder size | standard size (6 inch or 8 inch work holder) | standard size (6 inch) | ||
| Flexible substrates | ||||
| Charge/Discharge | Manual | Automatic | ||
| Positioning | Positioning a work holder with a pin, and adsorbing it | |||
| Sticking | Tape | 10mm 3 inch-tube | ||
| Amount of edge | 4edges | |||
| Capability | Speed | 12 sec./ piece | 18 sec./ piece | 20 sec./ piece |
| sticking time in case of 150mm work (time will be depends on tape types and conditions) | ||||
| Sticking size accuracy | ±1mm | |||
| ※It differs depending on the condition. | ||||
| Operation | Switch on the operation panel | Operated by LCD touch panel | ||
| Data memory capacity | Work size:10 | |||
| Mechanism | Movable axis | Turn table (Taping unit Y-axis travel) | turn table (table Y-axis travel) | Straight advancement movement of five stages |
| Magazine | Supplying out work holder:1/ Carrying out final product:1 | |||
| Power supply | 3φAC200V±10％ Flexible substrates |
|||
| 0.4kVA | 0.5kVA | 1.5kVA | ||
| Air source | 0.4 ～ 0.7MPa | |||
| Dimension | W770×D740×H1500mm | W830×D850×H1325mm | W1250×D1500×H1800mm | |
| Material | Approx160kg | Approx800kg | ||
| Working condition | Temperature | 10～35℃(22±2℃ recommended) | ||
| Humidity | 40～60%(Non- bedewing) | |||
Option
| Model name | FS-S5・9 | FS-4・12 | FSA-6×6RO |
|---|---|---|---|
| Option | ・Sticking tape(Consumables) ・Table part (designed in every case according to the size of the work holder) ・Work holder | ||
| Sheet supply device | |||
Outline Drawing
Industrial processing equipment Product lineup
Support
Contact Us
- Inquiries about products
Request catalog here 
- Reception time：9:00～18:00(Weekday)