|
|
 |
 |
|
|
HOLE CHECKER
 |
Enabling the measurement and inspection of micro holes |
|
High density measurement in wide view |
|
Quick inspection |
|
Easy operation |
|
Compact design for easy installation and moving |
| Work/ |
Punched thin materials (Ceramic green sheet, FPC, etc.) |
| Work size/ |
Max. 250mm |
| Moving method/ |
Table |
| Hole Minimum diameter/ |
 50 m |
| Hole Check, Count/ |
A maximum 100,000 holes
 Variation with the condition. |
| Inspecting time/ |
Undivided mode:5sec
Divided mode:15sec
3-divided mode:30sec
(With 10000 holes under the setting of inspection area at 250mm )
|
|
 |
|
|
CERAMIC CASTING SYSTEM MACHINE
|
Integrates process stages from coating to drying into a single compact machine |
|
Flexible operating conditions can be preset on the touch screen |
|
A variable length blade with the doctor blade system is already equipped |
|
Easy visual check of slurry coating |
|
Easy cleaning and setup |
| Coating width/ |
Max. 250 mm |
| Coating film/ |
5 - 200 m (varies by slurry conditions) |
| Coating speed/ |
200 - 12000 mm/min (varies by slurry conditions) |
| Drying temperature/ |
Max. 150 degrees C |
|
Specifications to subject to be changed without notice.
|
Contact Us 
