|
|
 |
 |
 PZ-AUTO S 20×24T
|
|
FLEXIBLE SUBSTRATE AUTO REFERENCE HOLE
PUNCHING MACHINE
 |
A newly developed tape feed table helps to diminish idle time . (Twin table)
|
|
Thin workpieces can be processed with high speed and high quality.
t : 10 m •120 punches/min ( PZ-AUTO S type )
Our original and new method of swing mirror mechanism is installed. PAT.P. ( PZ-AUTO S type ) |
|
Easy data processing.Teaching play back method. |
|
| PZ-AUTO S 20×24T (Twin table) |
| Work size/ |
Max.X610×Y510mm
|
| Working area/ |
Max.X600×Y500mm(3 axes(OP.) : Max.X550×Y500mm) |
| Punching Accuracy/ |
 20m with image processing mode |
| Punching speed/ |
120hole/min(Image processing with 20mm pitch in Y direction) |
| The number of axes/ |
One axis,Three axes (OP.) |
| PZ-AUTO S 20×24 (Single table) |
| Work size/ |
Max.X610×Y510mm |
| Working area/ |
Max.X600×Y500mm(3 axes(OP.) : Max.X550×Y500mm) |
| Punching Accuracy/ |
20m with image processing mode |
| Punching speed/ |
120hole/min(Image processing with 20mm pitch in Y direction) |
| The number of axes/ |
One axis,Two axes(OP.) |
| PZ-AUTO 12×20T (Twin table) |
| Work size/ |
Max.X510×Y310mm |
| Working area/ |
Max.X500×Y300mm |
| Punching speed/ |
100hole/min
(With 20mm pitch. Variation with the process, material,and condition ) |
| The number of axes/ |
One axis |
|
 |
|
|
PUNCHING MACHINE FOR FLEXIBLE SUBSTRATES
|
Large-sized flexible substrates can be punched. |
|
Teaching mechanism makes positioning operation much easier. |
|
Swing punching and image processing. |
| Work size/ |
Max.X600×Y500mm |
| Working area/ |
Max.X600×Y500mm |
| Punching speed/ |
95hole/min
(With 20mm pitch. Variation with the process, material,and condition ) |
| The number of axes/ |
One axis |
|
 |
PZ-DESK
|
|
IMAGE PROCESSING SYSTEM AUTOMATIC PUNCHING MACHINE
|
Automatic centering function and stable punching accuracy are realized. |
|
Installing of swing punch mechanism |
|
Installing of image processor and vacuum offset table |
|
| Work size/ |
Max.X600×Y500mm (ref.)
|
| Punch bosom size/ |
255mm |
| Punching speed/ |
1.2sec/hole |
| Punch size/ |
 0.63.0mm (Special order (OP.) up to3.9mm) |
| Press power/ |
800N |
| Work size/ |
Max.X600×Y500mm (ref.) |
| Punch bosom size/ |
255mm |
| Punching speed/ |
1.2sec/hole |
| Punch size/ |
0.66.0mm (Special order (OP.) up to6.49mm) |
| Press power/ |
1100N |
|
|
 |
|
|
IMAGE PROCESSING SYSTEM AUTOMATIC PUNCHING
MACHINE : HIGH-POWER TYPE
|
Highly accurate punching power:12,000N for steel nameplates |
|
Just manually place a target mark under the camera to display it on the monitor,punching is carried out with automatic position offset |
|
Swing punching and image processing |
| Work size/ |
Max.X600×Y500mm (ref.) |
| Punch bosom size/ |
255mm |
| Punching speed/ |
1.9sec/cycle (punching time 0.1sec UHT test film) |
|
 Specifications subject to change without prior notice.
|
|
Contact Us 
