Products
Products
Linear type flexible substrate punching machine
Model name | FP-1210L | |
---|---|---|
Work | Material | Flexible substrate (FPC)・large size ceramic green sheet,etc. Corresponding to PCB・Metallic substrate |
Thickness | Max.0.5mm | |
Size | Max.510×260mm | |
Machining area | Max.500×250mm | |
Way of installing | Supply : Sheet : Standard work holder, Vacuum frame Roll : Vacuum frame |
|
Punch units(OP.) | Number of installing(in the PU-25 size) | 12axes |
Capability | Punching precision | ±10μm(precision at the machining point within 25mm pitch in the standard punching range using UHT test film) |
Punching speed | Max.1500 holes/min (PUM-25L is used.) Max.1000 holes/min (PU-25L is used.) Max.600 holes/min (PU-25A is used.) (NC punch with 1mm pitch in Y direction on standard V/H work holder) |
|
System | Drive method | XYaxis linear motor |
Control function | Control unit | UHT made controller exclusively for mechanism control |
Operation | Operation with 6.5-inch color liquid crystal graphical touch panel | |
Machining data preparation | Software on PC (independent of the main body) | |
Number of processing data memories | 1 file (MAX.30,000 positions) | |
Network | Transmission of machining data from PC to the machine through LAN. The operation situation up to Max.4 main body can be monitored intensively by the PC. |
|
Image processing method | Image data processing is executed by the image processing function with CCD only made of UHT. | |
Static eliminating unit | Air/ionizers installed in the upper and lower parts of the left side of the punching unit | |
Power source | 3φ AC200V ±10% 2kVA | |
Air pressure source | 0.4~0.7MPa | |
Machine size | W1990×D1300×H1400mm | |
Machine weight (Body) | Approx. 1750kg | |
Working condition | Temperature | 10~35℃(22±2℃ recommended) |
Humidity | 40~60%(Non-dewing) |