Products
Products
Multi Product Punching Machine System Line Up
Model name | MPRO-PUNCHin150 | MPRO-PUNCHin200 | ||
---|---|---|---|---|
MPRO-PUNCHin150P | MPRO-PUNCHin200P | |||
Work | Material | Ceramic Green Sheet | ||
Form | Sheet | |||
Thickness | Max. 0.5mm | |||
Size | Roll width | Max.200mm | Max.250mm | |
Sheet | Max.□200mm | Max.□250mm | ||
Punching area | Max.□150mm | Max.□200mm | ||
Attachment(How to attach) | Supply : Sheet : V/F Work holder, Vacuum frame Roll : Vacuum frame |
|||
Punch | Die set unit | Layout in Max. □70mm |
Layout in Max. □120mm |
|
4 sets of tooling punch(+O.P) | ||||
PU unit | 6axes(PU-25 In-serve number) An unit selected by you | |||
Capability | Punching accuracy | ±10μm(Between 2 points in 1" punched on UHT's test film) | ||
Resolusion | X-axis Y-axis:1μm | |||
Punching speed | Die set unit | Die set unit : Max. 600 holes/min + Tooling hole punches(With 1.0mm pitch) | ||
PU unit | Max.600 hole/min NC punch on PU-25 with 1mm pitch in Y direction | |||
Feed speed | Max.30m/min(Simultaneous 2-axis control) | |||
Data | 1file(30000 positions) | |||
Control function | Control | Controller : UHT made MJUC controller | ||
Operation | 6.5" color LCD touch panel | |||
Punch data | By interactive software on outstanding P/C | |||
Network | Data transfer from P/C to machine through | |||
Dust collector | Via Punch : External dust collector Tooling punch : Ejector |
|||
PU unit : Ejector | ||||
Power | 3φ AC200V±10% 2kVA | |||
Air | 0.4MPa~0.7MPa | |||
Machine size | With loder module(Both sides) | W1440×D1200×H1600mm | W1665×D1280×H1600mm | |
W1990×D1290×H1600mm | W2315×D1470×H1600mm | |||
Machine mass | Approx.1100kg | Approx.1500kg | ||
Approx.1350kg | Approx.1750kg | |||
Working condition | Temperature | 10~35℃(22±2℃ recommended) | ||
Humidity | 40~60%(Non-dewing) |
Model name | MPRO-DIEin150 | MPRO-DIEin200 | ||
---|---|---|---|---|
MPRO-DIEin150P | MPRO-DIEin200P | |||
Work | Material | Ceramic Green Sheet | ||
Form | Sheet | |||
Thickness | Max. 0.5mm | |||
Size | Roll width | Min.150~Max.200mm | Min.200~Max.250mm | |
Sheet | Min.□150~Max.□200mm | Min.□200~Max.□250mm | ||
Punching area | Max.□150mm | Max.□200mm | ||
Tooling punch | Max.□170mm | Max.□220mm | ||
Attachment(How to attach) | Supply : Sheet : V/F Work holder, Vacuum frame Roll : Vacuum frame |
|||
Punch | Die set unit | Layout in Max.□150mm | Layout in Max.□200mm | |
2 sets of tooling punch (+O.P) | ||||
PU unit | 6axes(PU-25 In-serve number) An unit selected by you | |||
Capability | Punching accuracy | ±10μm(Between 2 points in 1" punched on UHT's test film) | ||
Resolusion | X-axis Y-axis:1μm | |||
Punching speed | Die set unit | Die set unit : Max. 600 holes/min + Tooling hole punches (With 1.0mm pitch) | ||
PU unit | Max.600 hole/min NC punch on PU-25 with 1mm pitch in Y direction | |||
Feed speed | Max.30m/min(Simultaneous 2-axis control) | |||
Data | 1file(30000 positions) | |||
Control function | Control | Controller : UHT made MJUC controller | ||
Operation | 6.5" color LCD touch panel | |||
Punch data | By interactive software on outstanding P/C | |||
Network | Data transfer from P/C to machine through | |||
Dust collector | Via Punch : External dust collector Tooling punch : Ejector |
|||
PU unit : Ejector | ||||
Power | 3φ AC200V±10% 2kVA | |||
Air | 0.4MPa~0.7MPa | |||
Machine size | With loder module(Both sides) | W1440×D1200×H1600mm | W1665×D1280×H1600mm | |
W1990×D1200×H1600mm | W2315×D1470×H1600mm | |||
Machine mass | Approx. 900kg | Approx. 1100kg | ||
Approx. 1350kg | Approx. 1600kg | |||
Working condition | Temperature | 10~35℃(22±2℃ recommended) | ||
Humidity | 40~60%(Non-dewing) |
Model name | MPRO-SELECTin150 | |||
---|---|---|---|---|
MPRO-SELECTin150P | MPRO-SELECTin200P | |||
Work | Material | Ceramic Green Sheet | ||
Form | Sheet | |||
Thickness | Max. 0.5mm | |||
Size | Roll width | Max.200mm | Max.250mm | |
Sheet | Max.□200mm | Max.□250mm | ||
Punching area | Max.□150mm | Max.□200mm | ||
Tooling punch | Max.□200mm | |||
Attachment(How to attach) | Supply : Sheet : V/ FWork holder, Vacuum frame Roll : Vacuum frame |
|||
Punch | Die set unit | Layout in Max.□150mm | Layout in Max.□200mm | |
4 different diameters' punching holes are settable. | ||||
4 sets of tooling punch (+O.P) | ||||
PU unit | 6axes(PU-25 In-serve number) An unit selected by you | |||
Capability | Punching accuracy | ±10μm (Between 2 points in 1" punched on UHT's test film) | ||
Resolusion | X-axis Y-axis :1μm | |||
Punching speed | Die set unit | Die set unit : Max. 600 holes/min + Tooling hole punches(With 1.0mm pitch) | ||
PU unit | Max.600 hole/min NC punch on PU-25 with 1mm pitch in Y direction | |||
Feed speed | Max.30m/min(Simultaneous 2-axis control) | |||
Data | 1file(30000 positions) | |||
Control function | Control | Controller : UHT made MJUC controller | ||
Operation | 6.5" color LCD touch panel | |||
Punch data | By interactive software on outstanding P/C | |||
Network | Data transfer from P/C to machine through | |||
Dust collector | Via Punch : External dust collector Tooling punch : Ejector |
|||
PU unit : Ejector | ||||
Power | 3φ AC200V±10% 2kVA | |||
Air | 0.4MPa~0.7MPa | |||
Machine size | With loder module(Both sides) | W1665×D1280×H1600mm | ||
W1990×D1200×H1600mm | W2315×D1420×H1600mm | |||
Machine mass | Approx.1100kg | |||
Approx.1350kg | Approx.1600kg | |||
Working condition | Temperature | 10~35℃(22±2℃ recommended) | ||
Humidity | 40~60%(Non-dewing) |
〇Module(Externally equipped)
※P type machine can have line type loader module only.
・DIEin
・SELECTin
・PUNCHin
Standard V/F or vacuum frame
Available for either V/F or vacuum frame
Work offset by binary image to detect the center of gravity of target mark.
Data conversion software from CAD data direct to punching data.
Pause the machine running by detecting the punch breakage using image processor
For insertion/removal of die bush
DIEin/SELECTin/PUNCHin
For die set tooling setting and test punching
For tooling exchange