Products
- HOME
- Industrial processing equipment
- Peripherals
- HOLE CHECKER
Peripherals
Industrial processing equipmentトップHOLE CHECKER
HCp-1010 series
- Applicable to thin materials: ceramic green sheet, etc.
- Applicable to thin materials : ceramic green sheet, etc.
- Enabling the measurement and inspection of micro holes, thus contributing to the reduction of percent defective
- Capable of inspecting φ50 m holes
- Micro-hole inspection with □230mm wide area.
- High-speed measurement - 4 seconds
Characteristics
- Enabling the measurement and inspection of micro holes
- A quality is judged according to the difference in the take-in master work data.
- Measurement and inspection data can be displayed and stored in PC.(OP)
- A maximum of 100,000 holes can be checked.
- Quick inspection
- 4 seconds high-speed measurement (under the area at 165×230mm and in undivided mode)
- Easy operation
- Operation is easy with 10.4inch LCD graphical touch panel.
- Compact design for easy installation and moving
Standard Specifications
| Model name | HOLE CHECKER(HCp-1010) | |
|---|---|---|
| Work | Work | Punched thin materials(Green Sheet, Substrate, etc) |
| Size | Max．□250mm Thickness Max.0.5mm | |
| Inspecting area | Taking without division once: Max.165×230mm | |
| Moving method | Table | |
| Hole | Minimum diameter | φ50μm(Variation with the range of view) |
| Check, Count | Max．100,000 holes ※Variation with the condition | |
| Inspecting time | Undivided mode: 4.0sec Divided mode: 8.0sec 3-divided mode: 10.5sec (With 6400 holes and the uppermost level of camera height under the setting of inspection area at □160mm) |
|
| Movable axis | X axis(Camera Left/Right) | Stepping motor |
| Y axis(Table) | ||
| Z axis(Camera Up/Down) | Manual | |
| Range of view | Max.170mm wide (Height of camera: the uppermost level) Min.85mm wide(Height of camera: the bottom level) |
|
| Lighting | LED line light(white) | |
| Display, Control panel | 10.4inch LCD touch panel | |
| Safety device | Allover hood | |
| Power source | AC100V ±10％ 0.5kVA | |
| Machine size | W570×D1005×H1872mm | |
| Machine weight | Approx．260kg | |
| Working condition | Temperature | 10～35℃(22±2℃ recommended) |
| Humidity | 40～60%(Non-dewing) | |
Options
- External data taking
- Software for HCp data conversion(Supported format ： PDF)
Outline Drawing
Industrial processing equipment Product lineup
Support
Contact Us
- Inquiries about products
Request catalog here 
- Reception time：9:00～18:00(Weekday)